FM-206 3-Port Rework Station Only
3-PORT REWORK STATION
The Hakko FM-206 3-Port Rework Station will power any Hakko FM Series handpiece, including FM-2027, FM-2030, FM-2032, FM-2022, FM2023, FM-2024, FM-2026 and FM-2029 thus offering the ability for you to tailor the station to fit your specific rework needs. The station's sleek, compact design minimizes loss of bench space and its powerful ports allow the use of the Hakko FM-2029 single hot air handpiece, and, or simultaneous use of the Hakko FM-2030 heavy duty soldering iron, making this the ultimate rework station..
• Graphic User Interface for easy setup and operation
• 3 simultaneous powered ports
• Self-contained pump for vacuum and air flow
• Digital airflow indicator
• Configurable display in °C or °F
• High performance hot air handpiece ramps up to max temp in < 20 secs
• Capable of hot air rework of 0201, 01005 and up to 10x10mm QFNs
• Meets or exceeds J-STD-001
• Manual or Automatic profile for hot air
• Auto shutoff with sleep function
• Passcode protected
• Security lock to protect against theft or unauthorized re-location
• Integrates with the Hakko FR-830, FR-870B and FR-872 Preheaters
• Low cost composite hot air nozzles
• Desoldering delay timer
• Optional footswitch for pump operation
• Option for external gas supply for hot air
• ESD safe by design
• NOTE: Tips and Nozzles are NOT included with station or any configuration• Part Number (station ONLY): FM206-55
To Learn How To:
• change the channel preset labels
• change the parameter settings
• change the preset and working temperature
• set an auto hot air profile with the FM-2029 hot air pencil
• turn off the grip alarm (if not using all 3 handpiece ports)Watch the How To videos in our Instructional Video Library
Learn How To integrate the Hakko FR-870 IR board preheater with the FM-206.
Watch the video below.
Hakko FM-206 Station Configurations
Standard Configurations (includes station FM206-55):
Part Number: FM206-DSS = Desolder, Solder, Solder
Part Number: FM206-DTS = Desolder, Tweezer, Solder
Part Number: FM206-STA = Solder, Tweezer, Air
Part Number: FM206-DSA = Desolder, Solder, AirHandpieces:
Desolder = FM-2024 (desoldering tool)
Solder = FM-2027 (soldering iron)
Tweezer = FM-2022 Parallel Remover (hot tweezer)
Air = FM-2029 (hot air rework pencil)
Station with one desoldering tool and two soldering irons.
MSLP: $1,659.97
Part Number: FM206-DSS
Station with one desoldering tool, one hot tweezer, and one soldering iron.
MSLP: $1,794.97
Part Number: FM206-DTS
Station with one soldering iron, one hot tweezer, and one hot air handpiece.
MSLP: $1,774.97.
Part Number: FM206-STA
Station with one desoldering tool, one soldering iron, and one hot air handpiece.
MSLP: $1,824.97
Part Number: FM206-DSA
Specifications
| Model Name | FM-206 |
| Part No. | FM206-55 |
| Input Voltage | 120 V |
| Power Consumption | 410W (max) |
| Temperature Stability | ±5°C |
| Temperature Range | subject to handpiece connected |
| Air Flow Capacity | 6L/min. max (hot air) |
| Vacuum Generator | Diaphragm pump system |
| Vacuum Pressure (max) | 80kPa (600mmHg) when desoldering in use |
| Suction Flow | 14L/min when desoldering in use |
| Dimensions | 162(W) x 136(H) x 245(D)mm |
| Weight | 6.2 kgs |
| Safety Approval |  |
CONTENTS (FM-206 Station Only)
| Description | Part No. |
| 3-Port Station |
FM206-55 |
| Tip Tray |
B2756 |
| Power Cord |
B2419 |
| Instruction Manual |
--- |
HANDPIECES
FM-2027 Soldering Iron (uses T15 Series tips)
| Model Name | FM-2027 |
| Part Number | FM2027-06 |
| Power Consumption | 70W |
| Temperature Range | 200-450°C / 400-840°F |
| Tip-to-Ground Resistance | < 2 ohms |
| Tip-to-Ground Potential | < 2 mV |
| Total Length (w/o cord) | 188mm (w/tip shape 2.4D) |
| Weight (w/o cord) | 30g |
| Cord | 1.2m |
FM-2024 Desoldering Tool (uses N3 Series Nozzles)
| Model Name | FM-2024 |
| Part Number | FM2024-02 |
| Power Consumption | 70W / 24V |
| Temperature Range | 350-450°C / 660-840°F |
| Tip-to-Ground Resistance | < 2 ohms |
| Tip-to-Ground Potential | < 2 mV |
| Total Length (w/o cord) | 180mm (w/ ø1.0 nozzle) |
| Weight (w/o cord) | 65g (w/ ø1.0 nozzle) |
| Cord | 1.2m |
CONTENTS (FM206-DSS Configuration)
FM2024-42 Conversion Kit
| Description | Part No. |
| Desoldering tool |
FM2024-02 |
| Handpiece holder |
FH200-05 |
| Ceramic filter, 10 pk |
A1514 |
| Connecting cord to holder |
B3253 |
| Cleaning drill |
B2873 |
| Nozzle remover |
B2876 |
| Instruction Manual |
--- |
(2) FM2027-06 Conversion Kits
| Description | Part No. |
| Soldering iron with green grip |
(2) FM2027-06 |
| Iron holder |
FH200-01 |
| Connecting cord to holder |
B3253 |
| Heat resistant pad |
B2300 |
NOTE: Tips and Nozzles NOT included
-
B1086 Cleaning Pin 0.8mmPart Number: B1086$3.87PIN,CLEANING,0.8mm,FR-4003/4101/4102/4001/301/300,FM-2024,817/808/807
Learn More -
B1087 Cleaning Pin 1.0mmPart Number: B1087$3.87PIN,CLEANING,1.0mm,FR-4003/4101/4102/4001/301/300,FM-2024,817/808/807
Learn More -
B1088 Cleaning Pin 1.3mmPart Number: B1088$3.87PIN,CLEANING,1.3mm,FR-4003/4101/4102/4001/301/300,FM-2024,817/808/807
Learn More -
B1089 Cleaning Pin 1.6mmPart Number: B1089$3.87PIN,CLEANING,1.6mm,FR-4003/4101/4102/4001/301/300,FM-2024,817/808/807
Learn More -
B2756 Tip TrayPart Number: B2756$17.87Tip tray to hold the T9, T15, T16, T22, T30, T31, T33, T35, N3, N4 series tip, for use with the FM-206/203 and FX-951/100.
Learn More -
-
B2874 Cleaning Pin 0.6mmPart Number: B2874$10.17PIN,CLEANING,0.6mm NOZZLE,FR-4101/4102/301/300,FM-2024,817/808/807
Learn More -
B2875 Cleaning Pin 2.0-2.3mmPart Number: B2875$10.172.0-2.3mm nozzle cleaning pin for the FR-4101/4102/4001/301,FM-2024,817/808/807
Learn More -
Out of stockFG-100 Tip Thermometer — (°Celsius)Part Number: FG100-01$236.27The Hakko FG-100 tip temperature thermometer uses a fine gauge wire sensor to measure tip temperatures up to 500°C. Easy to read digital temperature display reads the temperature settings immediately.
Note: For the Calibration Certificate, please order FG100-CAL.
This part number has been replaced with FG100B-03.
Learn More -
Out of stockFG-100 Tip Thermometer — (°Fahrenheit)Part Number: FG100-02$236.27The Hakko FG-100 tip temperature thermometer uses a fine gauge wire sensor to measure tip temperatures up to 932°F. Easy to read digital temperature display reads the temperature settings immediately. Note: For the Calibration Certificate, please order FG100-CAL.
This part number has been replaced with FG100B-03.
Learn More -
FM-2026 Nitrogen Soldering System KitPart Number: FM2026-KIT$539.27The Hakko FM-2026 N2 Soldering System Kit is ideal for all your lead-free hand soldering applications. NOTE: FX-780 and FX-781 N2 Generator NOT INCLUDED and must be purchased separately. See Product Description for details.
Learn More -
FS-100 Tip Cleaning PastePart Number: FS100-01$10.87Hakko’s FS-100 Chemical Paste is specially formulated to easily remove oxide from soldering tips. Can be used alone or use with the FT-700 Tip Polisher for increased effectiveness.
Learn More -
FT-700 Tip PolisherPart Number: FT700-05$160.57The Hakko FT-700 Tip Polisher helps increase the life of your tip with the action of two spinning polishing brushes. The Hakko FT-700 is an expeditious and efficient way to boost tip life and keep free from oxidation. Comes with the Hakko FS-100 Tip Polish, which has been specially formulated to boost the life of your tip and is powerfully effective when used with the Hakko FT-700.
Learn More -
FM-2022 SMD Parallel Remover Kit (Hot Tweezer)Part Number: FM2022-05$271.07The Hakko FM-2022 SMD Parallel Remover uses revolutionary parallel action between the tip ends-one tip remains stationary allowing greater surface contact between the tip and the component and providing more efficient and even heat transfer.
Learn More -
Out of stockFG-101 Soldering Iron Tester (°Fahrenheit)Part Number: FG101-10$1,221.27The Hakko FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. This tester will provide you with quick, accurate soldering measurements. Note: Calibration Certificate comes with equipment.This part number has been replaced by FG101B-03.
Learn More -
Out of stockFG-101 Soldering Iron Tester (°Celsius)Part Number: FG101-16$1,221.27The Hakko FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. This tester will provide you with quick, accurate soldering measurements. Note: Calibration Certificate comes with equipment.This part number has been replaced by FG101B-03.
Learn More -
FM-2023 Mini Hot Tweezer KitPart Number: FM2023-05$310.77Hakko’s FM-2023 Mini Hot Tweezer tool is designed for use with small chip components, as small as 0201. This Tweezer tool has a unique feature allowing it to work in standard or reverse action mode.
Learn More -
FM-2026 Nitrogen Soldering Iron Handpiece KitPart Number: FM2026-06$238.97The Hakko FM-2026 soldering iron is designed to supply hot gas to the soldering area, which can increase the soldering efficiency as the gas pre-heats the work area. Calibration is required before starting operation.
Learn More -
Out of stockFR-870 PCBoard PreheaterPart Number: FR870-04$1,047.97The Hakko FR-870 infrared 2-Bank bench-top board heater is designed to elevate the temperature of the printed circuit board assemblies so that components on them can be easily soldered and desoldered. This tool is particularly useful when soldering Pb-free assemblies.
Learn More -
FM-2024 Desoldering Handpiece KitPart Number: FM2024-42$333.97The Hakko FM-2024 desoldering kit includes handpiece holder with tip cleaner, cleaning drill, extra filters, heat pad and desoldering handpiece.
Learn More -
FM-2027 Soldering Iron Handpiece KitPart Number: FM2027-06$123.67This Hakko FM2027-06 Conversion Kit is all you need to add an additional soldering iron to your existing Hakko FM station. The pencil style handpiece takes the T15 Tip Series.
Learn More -
FM-2029 Hot Air Pencil KitPart Number: FM2029-01$311.57This Hakko FM-2029 Hot Air Pencil is everything you need to add an additional hot air iron to your Hakko FM-206 station!
Learn More -
-
B3686 Connecting CordPart Number: B3686$22.57Connecting cord for the FR-870B/872/870,FM-206
Learn More -
FM-2030 Heavy Duty Soldering Iron KitPart Number: FM2030-02$178.37The Hakko FM-2030 Heavy Duty Soldering iron Kit is the ideal companion for the Hakko FM-203 soldering station or the FM-206 rework station.
Learn More -
FM-2031 Nitrogen Heavy Duty Soldering Iron Handpiece with HolderPart Number: FM2031-02$311.57The Hakko FM-2031 Nitrogen compatible soldering iron is ideal for soldering difficult-to-solder heavy ground planes and high heat sink applications. Uses T22 tips (not included) and can be used with the Hakko FM-203 soldering station and the FM-206 rework station.
Learn More -
FM-2031 Nitrogen Heavy Duty Soldering System KitPart Number: FM2031-KIT$667.87This kit includes the Hakko FM2031-02 handpiece and the FX-791 N2 station controller. This kit is the ideal solution for all your lead-free hand-soldering applications.
Learn More -
FM-2032 Micro Soldering Iron Handpiece OnlyPart Number: FM2032-51$108.67Add precision micro soldering capabilities to your FX-951, FM-203, or FM-206 soldering and rework system. This slim, lightweight handpiece has a tip-to-grip distance optimized for operator dexterity while working under microscopes.
Learn More -
FM-2032 Micro Soldering Iron Conversion KitPart Number: FM2032-52$178.37This conversion kit includes the sleek micro soldering iron, iron holder with sponge, heat resistant pad, and "sleep" connecting cable. For use with the Hakko FX-951, FM-203, and FM-206 soldering systems.
Learn More
-
-
B2384 Power ReceptaclePart Number: B2384$7.97Power receptacle for the FR-810B/811/410/400/870B/870,FM-206/5/4/3,C5016/FX-889, and FG-101B
Learn More -
B2419 Power CordPart Number: B2419$18.27Power Cord for the FU-601,C5016,FG-1010B,FR-410/400/870B,FX-889/802/801/100/951/FM-206/5/4/3,FT-802
Learn More -
B2756 Tip TrayPart Number: B2756$17.87Tip tray to hold the T9, T15, T16, T22, T30, T31, T33, T35, N3, N4 series tip, for use with the FM-206/203 and FX-951/100.
Learn More -
B2852 SwitchPart Number: B2852$4.37Replacement switch for the FM-206/204/203,FX-888D/888/951,FA-430/FT-801/FR-830
Learn More -
B2880 Vacuum CapPart Number: B2880$6.67Vacuum outlet cap with O-ring for the FM-206/205/204,C1492
Learn More -
-
B2954 Vacuum Cap O-ringPart Number: B2954$3.27O-ring for the FM-206/205/204,C1492 vacuum outlet cap
Learn More -
-
Out of stockB3439 Vaccum RetainerPart Number: B3439$7.07Retainer replcement for the FM-206/205/204,C1492 vacuum outlet
Learn More -
B3686 Connecting CordPart Number: B3686$22.57Connecting cord for the FR-870B/872/870,FM-206
Learn More -
-
-
-
B3670 Diaphragm SettingPart Number: B3670$4.87Pump diaphragm setting plate for the FM-206
Learn More -
-
-
B3674 Fuse 250V-7APart Number: B3674$3.47250V-7A fuse for the FR-410/400,FX-801/FM-206
Learn More -
-
B3752 Retainer Vacuum OutletPart Number: B3752$7.27Retainer Vacuum Outlet, for use with FM-206/205/204 and the C1492 replacement filters
Learn More
