To properly utilize the 373 Solder feeder you'll need a solder diameter adjustment ring, the matching tube unit, guide pipe, and for those that would like a bottom feeder type you'll also want the proper hand piece receptacle. To figure out your correct configuration see the example and tables below.

Learn More

STATION,SDRG,DIGITAL,ESD,FX-8801,FX-888D

Hakko’s FX-888D is the updated, digital version of the popular FX-888 and includes several new features-digital calibrations to simplify the setup and operation, new password protection, 5 preset temperature storage, and compact design takes up less workbench space. 

Note: Station available in blue and yellow color only (all other colors shown on Hakko.com are not available in North America)

Learn More

STATION,SDRG,ESD,w/o TIP,FX-951
Keep your bench clutter to a minimum and breeze through your tasks. This soldering station features a compact design with superior heat transfer and thermal recovery.

Request a Free Demo

Learn More

STATION,SDRG,IH,ESD,w/o TIP,FX-100

RF induction heat technology at its best. Designed for fast, reliable, accurate, efficient, and ESD safe soldering. No calibration required, just turn it on and in just seconds you’ll be ready to go. Boost control delivers a boost of extra power when you need it. Its compact design minimizes the workbench footprint.

Request a Free Demo

Learn More

STATION,DSDRG,190W,ESD,PENCIL,FR-410

Everything you love about the original FR-410, now with a handpiece that has a more efficient nozzle quick-change capability!

Request a Free Demo

Learn More

STATION,DSDRG,300W,UHD,ESD,GUN,FR-400

The Hakko 300W FR-400 Ultra heavy duty desoldering station is specifically designed for the difficult rework of extremely large mass components where a significant amount of thermal inertia must be overcome. An excellent tool for desoldering the most challenging solder joints. Now with a more efficient nozzle quick-change capability!

 

Request a Free Demo

Learn More

Hakko’s FM-204 is a self-contained desoldering and soldering station with a built-in vacuum pump. This versatile station uses the N3 series quick-change composite nozzles.
Learn More

The HAKKO FR-810B is ideal for removing SMDs and includes an integrated vacuum pickup system with a special visual indicator in the handpiece that allows the operator to visually see when the component has completely reflowed and is safely lifted from the pad.

Request a Free Demo
Learn More

STATION,HOT AIR,DIGITAL,ESD,w/VACUUM,FR-811

An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components. For complete set please see FR811-SET.

Request a Free Demo

Learn More

The Hakko FM-206, 3-port Rework Station will power any Hakko FM Series handpiece allowing your station to be customized to your rework needs. The Graphic User Interface makes the station easy to set up and operate. This is the ultimate rework station! The Hakko FM206-DTS configuration contains: (1) FM-2024 desoldering tool (FM2024-42 Kit) (1) FM-2022 Parallel Remover (FM2022-05 Kit) (1) FM-2027 soldering iron (FM2027-06 Kit) • FM206-55 station is included • Tips and Nozzles NOT included
Learn More

SMOKE ABSORBER,w/C1571,FA-430

The Hakko FA-430 Smoke and Fume Extractor is specially designed for use in the electronics soldering process by extracting the contaminated air directly at the source. The three stage filtering system returns purified air to the area. Kit includes filter and duct kit with rectangular nozzle.

Note: Some processes may involve the use of highly corrosive substances and are not recommended for use with the FA-430.

Request a Free Demo

Learn More

SMOKE ABSORBER,w/C1572,FA-430

The Hakko FA-430 Smoke and Fume Extractor is specially designed for use in the electronics soldering process by extracting the contaminated air directly at the source. The three stage filtering system returns purified air to the area. Kit includes filter and duct kit with round nozzle.

Note: Some processes may involve the use of highly corrosive substances and are not recommended for use with the FA-430.

 

Request a Free Demo

Learn More