Videos

Items 1 to 10 of 92 total

Show per page
  1. Introducing The HAKKO B5286 Cap Kit

    Released: 3/10/21

    A new cap kit designed for the FX-600 and FX-601 soldering irons. This protective cap is easy to install and take apart. Once installed, you simply unscrew the cap to expose the soldering iron tip for use. When you are finished soldering, unplug the soldering iron and screw the cap back on. The heat resistant plastic prevents the tip from contacting and melting other tools or power cords in your toolbox when you put it away. It also helps reduce the risk of injury from accidentally touching the soldering iron tip when it is cooling down after use.

  2. Eye On Hakko presents "How To Change vs Adjust the FX-888D Soldering Temperature"

    Released: 2/25/21

    On this episode Kenta demonstrates the difference between "changing" the soldering temperature and "adjusting" the soldering temperature on the FX-888D soldering station. He also showcases a brief overview of the optional accessories available for the station. This episode was broadcast and recorded LIVE on February 26, 2021.

  3. The New HAKKO FT-720 Automatic Tip Cleaner

    Released: 1/28/21

    The new HAKKO FT-720 Tip Cleaner provides quick and effective cleaning of soldering iron tips with sensor activated counter-rotating brushes, which remove tip oxides, debris, and excess solder without damaging the tip plating. The FT-720 is equipped with long life fluoroplastic brushes that minimize temperature drop of soldering iron. The brushes are easy to remove and replace, with optional resin and metal cleaning brushes available.

  4. The CHP DPF 300 Depaneling System — Presentation Video — CHP Sales and Service by American Hakko

    Released: 11/15/20

    Watch and learn about the CHP DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time. Thanks for watching!

  5. The CHP DPF-300 Depaneling System — CHP Sales and Service by American Hakko

    Released: 11/1/20

    The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.

  6. The HAKKO FX-901 Soldering Iron by Sei and Kai

    Released: 9/17/20

    Sei and Kai talk about the features of the portable FX-901 soldering iron and demonstrate soldering an LED to a circuit board.
    Thanks for watching!

  7. "Eye On Hakko" presents, the "CHP DPF-300 Depaneling System" — CHP Sales and Service by American Hakko

    Released: 9/10/20

    On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
    This episode was broadcast and recorded LIVE on September 11, 2020.
    Thanks for watching!

  8. "Eye On Hakko" presents "All About Preheaters"

    Released: 8/12/20

    When soldering or desoldering components on a circuit board, preheat is often needed to assist the work. In this episode we examine the HAKKO FR-830 and FR-870B preheaters and demonstrate how to replace the heater lamps on the FR-872 preheater.
    This episode was broadcast and recorded live on August 13, 2020.
    Thanks for watching!

  9. "Eye On Hakko" presents the "FR-810B Hot Air Rework System"

    Released: 7/8/20

    On this episode we learn the basic operation of the FR-810B rework station, how to set and use the various system parameters and how to use it in manual mode and in semi-automatic mode by linking individual presets.
    This production was broadcast and recorded LIVE on July 9, 2020.
    Thank you for watching!

  10. "Eye On Hakko" presents the "FM-203 — Parameter Settings and Features"

    Released: 6/10/20

    Learn how this dual port station can use 8 different handpieces and how to access and set all 10 parameter settings.
    This production was broadcast LIVE and recorded on June 11, 2020.
    Thanks for watching!

Items 1 to 10 of 92 total

Show per page
To Top