Availability: In stock
Part Number
FG101-10

FG-101 Soldering Iron Tester (°Fahrenheit)

List Price:
Special Price $305.30 Regular Price $1,221.27

The Hakko FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. This tester will provide you with quick, accurate soldering measurements. Note: Calibration Certificate comes with equipment.

This part number has been replaced by FG101B-03.

NOTE: This is a REFURBISHED item

Status:
Discontinued
SOLDERING TESTER

The HAKKO FG-101 Soldering Tester measures tip temperature, leak voltage, and tip-to-ground resistance. Leak voltage and tip-to-ground resistance can be easily measured due to automatic self-correction of the zero point.

• Resistant to drift and ambient temperature variations.

• Highly reliable and accurate measurements.

• MAX HOLD function displays maximum value when MAX HOLD button is pressed.

• Suitable for Lead-Free solder applications.

• Measures in degrees Fahrenheit.

• Celsius unit availabe by special order

NOTE: Leak voltage is that potential resulting from the small current ‘leaking’ from the tip of a soldering iron, even though the tip may be grounded. This current can damage sensitive components. The HAKKO FG-101 provides a quick and accurate means of measuring this leak voltage.

 

Note: Calibration Certificate comes with equipment.

Part Number FG101-10
Temperature   Resolution 1°F
  Measurement range* 32°F - 1300°F
  Precision ±6°F (572°F - 932°F)
±10° outside of above range
  Sensor K(CA) thermocouple
Voltage   Resolution 0.1mV
  Measurement range 0-40mV (AC)
  Precision ± (5% + 1 digit)
Resistance   Resolution 0.1 ohms
  Measurement range 0-40 ohms
  Precision ± (5% + 1 digit)
Display   Liquid Crystal Display 3.5 digits
  Burnout -/
  MAX HOLD

Refer to manual

Monitor Output   Temperature 1mV/°C, °F
  Voltage 10mV/mV
  Resistance 10mV/ohm
  Burn out -7V (MAX.)
Power Consumption 120V/2W
Dimensions 200(W) x 50(H) x 120(D) mm
(7.9[W] x 2.0[H] x 4.7[D] in.)
Weight 1 kg (2.2 lbs.)
Operation Temperature 32°F—104°F  20%—90% RH

*Temperature sensor 191-212 can only be used to measure temperatures below 932°F (500°C)

Note: For measurement in °C, use Part Number FG101-16.



CONTENTS

Part Number
Description
N/A
FG-101 Soldering Tester
B1752
Conduction plate
B1754
Ground clip
B1950
Conduction wire
191-212
Sensor 10 pcs
B2419
Power cord

ACCESSORIES

Part Number
Description
A1310
Temperature probe for soldering pot
B2468
Fuse / 125V-5A
191-212
Sensor 10 pcs
A1556
Thermocouple Sensor A
A1557
Thermocouple Sensor B

 

APPROVED

 

 

 

 

To Top