FM-2022 SMD Parallel Remover Handpiece Only
SMD PARALLEL REMOVER
The Hakko FM-2022 SMD Parallel Remover uses revolutionary parallel action between the tip ends (one tip remains stationary) allowing greater surface contact between the tip and the component and providing more efficient and even heat transfer. FOR USE WITH THE FM-203 SOLDERING STATION OR FM-202 SOLDERING STATION ONLY.
Whether removing small chips or larger SOP components, the parallel action of the FM-2022 also allows for a more secure hold onto the component.
• the Parallel Remover uses the same quick-change composite tip technology as the popular FM-203 or FM-202 soldering station
• each tip is encoded at the factory on a non-magnetic barcode, which is automatically read by the station when inserted into the process gate to ensure tip temperature accuracy
• a fixing collar properly aligns the tips opposite each other
• changing tips for different types of components has never been easier.
Part Number: FM2022-02 (see
Specifications for details)
NOTE: Handpiece Only. Shipped without tips.
For the complete setup KIT, see FM2022-05
|Power Consumption||140W (24V)|
|Temperature Range||200°C - 400°C (400°F - 750°F)|
|Temperature Accuracy||±15°C (±27°F) of set temperature|
|Temperature Stability||±5°C (±9°F) at idle temperature|
|Tip to Ground Resistance||< 2 ohms|
|Tip to Ground Potential||< 2mV (Typical 0.6mV)|
|Cord Assembly||1.2m (4 ft.)|
|Total Length (w/o Cord and Tip)||110mm (4.3 in.)|
|Total Weight (w/o Cord)|| 53g (Handpiece)
What's in the box?