Videos

On this episode we demonstrate the CHP brand DPF-3...

On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
This episode was broadcast and recorded LIVE on September 11, 2020.
Thanks for watching!

When soldering or desoldering components on a circ...

When soldering or desoldering components on a circuit board, preheat is often needed to assist the work. In this episode we examine the HAKKO FR-830 and FR-870B preheaters and demonstrate how to replace the heater lamps on the FR-872 preheater.
This episode was broadcast and recorded live on August 13, 2020.
Thanks for watching!

On this episode we learn the basic operation of th...

On this episode we learn the basic operation of the FR-810B rework station, how to set and use the various system parameters and how to use it in manual mode and in semi-automatic mode by linking individual presets.
This production was broadcast and recorded LIVE on July 9, 2020.
Thank you for watching!

Learn how this dual port station can use 8 differe...

Learn how this dual port station can use 8 different handpieces and how to access and set all 10 parameter settings.
This production was broadcast LIVE and recorded on June 11, 2020.
Thanks for watching!

This episode focuses on how to use and set the six...

This episode focuses on how to use and set the six (6) parameter settings and a demonstration of some of the features of the HAKKO FX-951 soldering station.
This production was broadcast LIVE and recorded on May 21, 2020.
Thanks for watching!

Learn proper maintenance on the HAKKO FA-400 Smoke...

Learn proper maintenance on the HAKKO FA-400 Smoke Absorber and FA-430 Fume Extraction System in this episode of "Eye On Hakko."
This episode was broadcast LIVE and recorded on April 30, 2020.
Thanks for watching!

In this episode we demonstrate how to properly mai...

In this episode we demonstrate how to properly maintain your HAKKO desoldering tools, including the FR-301, FR-410's FR-4103 gun-type and FR-4104 pencil-type handpieces, the FM-2024, and the 817, which is used on the 472D desoldering station.
This episode was broadcast LIVE and recorded on April 23, 2020.
Thanks for watching!

Join us for a show and tell episode on the basic f...

Join us for a show and tell episode on the basic fundamentals of Soldering Iron Tip Maintenance with the HAKKO 599B tip cleaner, FT-700 tip polisher and FS-100 tip polishing paste.
This episode was broadcast LIVE and recorded on April 16, 2020.
Thanks for watching!

In this episode of Eye On Hakko we preview some of...

In this episode of Eye On Hakko we preview some of the products we will be exhibiting at the IPC APEX 2020 exhibition in the San Diego Convention Center Feb. 4-6, 2020.

See us at Booth #1851.

San Diego Convention Center
February 4-6, 2020