Availability: Out of stock
Part Number

FR-410 High Power Desoldering Station with Pencil-Style Desoldering Tool

List Price:

Using just 140 watts of power, this station is excellent for desoldering components on multi-layer circuit boards, including those with difficult to reach areas and narrow spaces. This station has improved features to make it easier to use and increase efficiency, including an Anti-Clog Function (ACF) and display, larger and easier-to-change filter, and easier, safer nozzle replacement.

This part number has been replaced by FR410-53.


• New, wider selection of nozzle configurations

• Large, easy-to-read display that includes a vacuum level indicator

• Three (3) user-programmable presets

• Password lockout to prevent any unauthorized changes to the systems operation or setup

• Vacuum system with .02 second delay timer to prevent nozzle clogging

• Easy-access solder collection chamber that is simple to clean

• Easy-to-change heater cartridge with American Hakko composite ceramic technology

• Independent nozzle which provides a low cost of operation

FR-410 High Power Desoldering Station Alternate Options

FR410-02 Gun Style


 Model Name  FR-410
 Part No.  FR410-03
 Input Voltage  120 VAC 50/60 Hz
 Power Consumption  190W
 Temperature Range  330° - 450°C (620° - 850°F)
 Temperature Stability  ±9°F (±5°C) at idle
 ESD Safe  Yes
 Safety Approval
 Output Voltage  24V
 Vacuum Generator  Pump - Double Cylinder
 Vacuum Pressure (max)  80 kPa / 600 mm HG (24 in. Hg)
 Suction Flow  15 L/min.
 Temperature Control  Microprocessor control using closed-loop sensor
 Temperature Presets  3-user Programmable
 Sleep Enabled  Yes
 Auto Power Off Safety  Yes
 Low Temp Alarm  Yes
 Process Control Lockout  Yes-Password
 Dimensions (W x H x D)  6.5 x 5.4 x 9.6 in. (165 x 137 x 244 mm)
 Weight (w/o cord)  10.6 lbs. (4.8 kg)
 Model No.  FR-4102 (Pencil)
 Part No.  FR4102-81
 Power Consumption  140 W
 Nozzle to Ground Resistance  < 2 Ohms
 Nozzle to Ground Potential  < 2 mV
 Heater  HAKKO Composite Ceramic™
 Nozzles  N61 Series
 Standard Nozzle (included)  N61-05 (1.0 mm / 0.04 in.)
 Cord Length  4 ft. (1.2 m)
 Total Length (w/o cord)   8.1 in. (206 mm)
 Weight (w/o cord)  0.35 lbs. (160 g)

 As measured with N61-05 nozzle installed




 What's in the box?

 Description  Part No.
 FR-410 Desoldering Station  --
 FR-4102 Pencil-Type Desoldering Handpiece  FR4102-81
 Handpiece Holder with cleaning sponge  FH410-02

 Maintenance Kit that includes:

 B1087 - 1.0 mm Cleaning Pin

 B1215 - Heating Cleaning Pin

 B1303 - 1.0 mm Cleaning Drill

 B5106 - Nozzle Wrench

 A5020 - Station Filter (x2)

 A5044 - Handpiece Filter (x4)





 Standard Nozzle  N61-05 (1.0 mm / 0.04 in.)
 Power Cord  B2419
 Instruction Manual  --



To Top