Intelligent Solder Feeder (L-Type)
FU-500 Feeder Controller unit with 3 wired cord.
See specifications tab for unit configuration options
Hakko’s FU-500 Intelligent Solder Feed works in conjunction with the Hakko FU-601 Robotic Integration Soldering Module and can be integrated with various robotic systems to achieve low-cost soldering automation.
The FU-500 Intelligent Solder Feeder lends a helping hand to automatically feed the solder wire to a specific position and allows for easy adjustment of the solder feed position, which is critical for automated systems. The Intelligent Solder Feed Unit also features a compact driver unit that allows the feed to be brought closer to the iron, increasing the accuracy of the amount of solder fed.
With an optical sensor, the FU-500 can detect solder clogging, slipping, and the end of the solder roll. The Intelligent Solder Feeder is also equipped with a mechanism that perforates into the solder wire as a countermeasure against flux and solder splash.
|Part No.||FU500-21X (L Type)|
|Input Voltage||127 VAC 50/60 Hz|
5.7 x 3.9 x 9.1 in.
(145 x 100 x 230 mm)
|Weight w/o Cord||5.1 lb. (2.3 kg)|
|Part No.||CX1010 ( L Type)|
|Compatible Solder Diameter||0.3-1.6 mm|
|Weight||1.8 lb (800g)|
To configure the FU-500 for use with your soldering application, select the Feeder Drive, Guide Pipe Assembly, and PTFE Tube Insert based on the diameter of the solder you will be using. These parts are sold seperately, but are required for the station to be operational.
|0.3 mm||0.5 mm||0.6 mm||0.8 mm||1.0 mm||1.2 mm||1.6 mm|
|Guide Pipe Assembly||BX1007||BX1008||BX1009|
|PTFE Tube Insert||BX1010||BX1011||BX1012||BX1013||BX1014||BX1015|