DPF-300 Depaneling System
SYSTEM, DEPANELING, ELECTRICAL VACUUM, ESD, DPF-300
A new manual router table for depaneling PCB's from a panel or multiblock. A portable depaneling system providing the same performance and quality of a high-end router machine, with no programming required, at a fraction of the cost compared to other machines.
NOTE: Milling Bits and Interchangeable Guide sold separately
NOTE: Please Call For Any Inquiries
Introducing the highly anticipated CHP DPF-300 Depaneling System, a direct upgrade from the popular CHP DPF-200. The DPF-300 adapts the quality and benefits of the DPF-200, but this new and improved dynamic system is equipped with an industrial type electric motor spindle, eliminating the need for compressed air to operate the system.
• SAFETY
The shape of the interchangeable guide rail (Patent pending) assists the operator to safely place and maneuver the PCBs until the cut is completed. This prevents damage to the PCB should the operator insert the wrong size guide rail that does not match perfectly with the geometry and size of the panel’s slot.
• VACUUM PUMP & FILTER SYSTEM
A powerful vacuum pump is mounted directly under the table top, and a vacuum hose connected at the guide rail removes the PCB dust at the source for a clean and healthy work environment.
The fine dust particles are collected by a filter cartridge that is easy to access.
• ESD TABLE CONSTRUCTION
The table is made of steel with a laminated ESD table top to protect against electrostatic discharge.
• MINIMUM VIBRATION
The table’s steel construction provides a sturdy and stable working platform, and the high speed precision spindle operates at speeds up to 60,000 rpm with minimal vibration.
• PORTABLE
ESD zinc coated steel front feet and heavy duty rear casters make the system easy to move to another location.
NOTE:
Guide rail and milling bits NOT included and must be purchased separately
NOTE: Milling Bits and Interchangeable Guide sold separately
Specifications
Part No. | DPF-300-E |
Dimensions | 64 x 70 x 95 cm (25 x 28 x 37 in) |
Clearence | 164 x 170 cm (65 x 67 in) |
Weight | 73 kg (161 lbs) |
Voltage | 115V/60Hz |
Power | 1 kW |
Motor Spindle Power | 0.27 kW |
Micro-spindle Speed | 24,000 RPM Max. |
Noise Level | 80 dB(A) ± 3 dB(A) measured at the operator position. Test FR4 thck.1.6 mm / cutter 2 mm |
Vibrations | < 2.5 m/s^2 Test FR4 thck.1.6 mm / cutter 2 mm |
Storing Temperature | -10°C to 50°C (14°F to 122°F) |
Working Temperature | 5°C to 35°C (41°F to 95°F) |
Interchangeable Guide Material | Hardened ground steel |
ESD Safe | Yes |
|
|
PCB Characteristics | |
Thickness | Max. 4 mm |
Slot Length | Min. 10.5 mm |
Slot Width | 1.5 - 2.5 mm |
Slot Width Tolerance | 0 / -0.02 mm |
Isthmus Distance From Components | min. 0.8 mm |
PCB Material | FR4/ CCL/ CEM/ Aluminum* |
* For aluminum depaneling, contact American Hakko Products, Inc. for the milling bit specifications.
What's in the box?
Description | Part No. |
Depaneling System | DPF-300-E |
2 mm Hex Key (for interchangeable guide) | -- |
3 mm Hex Key (for support head) | -- |
14 mm Wrench (for milling bit) | -- |
17 mm Wrench (for milling bit) | -- |
Vacuum Pipe | DPF-TF-005 (2pcs) |
Rubber Tube | DPF-TAV0806B (2pcs) |
Adjustable Wrist Strap | SC-0807 |
Instruction Manual | -- |
Dust Filter Certification | -- |
-
-
-
-
-
-
-
-
-
-
-
DPF Accessories Kit$3,368.37
KIT,STANDARD ACCESSORIES,DPF-200/300
The Air House Kit, P/N 999-216 is recommended for the DPF-200 and DPF-300
Learn More
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
DPF-300 Milling Head w/ Spindle$1,138.07
KIT, MILLING HEAD W/SPINDLE, DPF-300
A milling head with spindle designed for the DPF-300
Learn More -
-