Videos

The latest from CHP are the ATX-12, 30, and 50 Int...

The latest from CHP are the ATX-12, 30, and 50 Intelligent Torque Drivers. These premium non-slip grip drivers work with the ATX Intelligent Torque Controller to calculate pressure and precision. These transducer drivers have an LED status indicator ring, use a 1/4” hex bit, a torque range of 2.4 to 50 (kgf-cm) with a max speed of 2000. The controller includes a network interface that stores and exports graph data, is user friendly and intuitive for easy set-up. LED backlight, the controller comes with either 1 or 2 ports for powering and controlling the ATX drivers. The large touchscreen interface allows the user to easily adjust the settings on the drivers for superior torque control.

American Hakko proudly introduces the NEW ATX Inte...

American Hakko proudly introduces the NEW ATX Intelligent Torque Drivers by CHP. Three different drivers each with a different torque range with the option for a single port or dual port controller. The ATX Intelligent Torque Controller is a 10-inch, LCD touchscreen controller that includes a network interface that stores and exports graph data, is user friendly and intuitive for easy set-up. The new ATX series takes torque drivers to the next level with Power, Performance, and Precision in mind. Reinventing the torque driver and more, backed by the Quality, Reliability, and Power you've come to expect from HAKKO. Sales and Service by American Hakko Products, Inc.

Take a sneak peek at this years IPC Apex Expo and ...

Take a sneak peek at this years IPC Apex Expo and catch a FIRST LOOK at the All NEW FX-971 and FX-972 Soldering Stations. Also featured at this years booth was the ALL NEW ATX Intelligent Torque Drivers from CHP. Attendees were given full access to these new products releasing March 1, 2023.

Watch and learn about the CHP DPF-300 depaneling t...

Watch and learn about the CHP DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time. Thanks for watching!

The DPF-300 is a manual router table for depanelin...

The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.

On this episode we demonstrate the CHP brand DPF-3...

On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
This episode was broadcast and recorded LIVE on September 11, 2020.
Thanks for watching!

In this video we showcase the CHP brand of electri...

In this video we showcase the CHP brand of electric torque screwdrivers, power supplies and numerous accessories.

The electric screwdrivers are designed for precision torque control and include a wide selection of brush, brushless and direct plug-in models with torque ranges from 0.26 - 21.7 lbf-in and speeds from 450 - 2000 RPM. All drivers are ESD safe to protect assemblies from electro-static shock. Watch to learn more.

Thanks for watching!

In this episode, the CHP Electric Torque Screwdriv...

In this episode, the CHP Electric Torque Screwdrivers, power supplies and accessories are showcased and demonstrated, including the announcement of American Hakko's CHP Electric Torque Screwdriver Trade-In program.

The CHP Electric Torque Screwdriver Trade-In program is a limited time offer from September 9 thru November 27, 2019.

This production was broadcast LIVE via GoToWebinar on September 27, 2019.

Thanks for watching!

Watch and learn what customers have to say about t...

Watch and learn what customers have to say about the CHP DPF-200 manual router table.

Thanks for watching!

Join us for American Hakko's "Eye On Hakko" LIVE w...

Join us for American Hakko's "Eye On Hakko" LIVE web broadcast covering a general overview of HAKKO's soldering, desoldering, hot air rework, and fume extraction systems, and CHP brand hand tools, ESD supplies and electric torque screwdrivers.

This live production was broadcast via GoToWebinar and recorded on January 25, 2019

Thanks for watching!

The CHP brand offers a vast selection of precision...

The CHP brand offers a vast selection of precision tools including, cutters, pliers, shears, wire strippers, lead formers, depaneling tools, and tweezers. The CHP cutters exhibit the same high quality performance of a forged tool but at a fraction of the cost.

The CHP DFP 200 is a manual router table for depan...

The CHP DFP 200 is a manual router table for depaneling printed circuit boards from a panel or multi-block. The DPF 200 milling cutters (bits) cut the tab of the panel with the same quality as a expensive automated system but at a much lower cost. Features include, interchangeable guide rails designed for safety, an integrated vacuum system located directly on the guide rail to remove circuit board dust from the work area, ESD steel table construction with an Equipotential Bonding Point to protect against electro-static discharge, a wide selection of milling cutters (bits) with specific geometric shapes, locking casters for portablitly, and much more.