Videos

Watch and learn about the CHP DPF-300 depaneling t...

Watch and learn about the CHP DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time. Thanks for watching!

The DPF-300 is a manual router table for depanelin...

The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.

On this episode we demonstrate the CHP brand DPF-3...

On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
This episode was broadcast and recorded LIVE on September 11, 2020.
Thanks for watching!

On this episode we learn the basic operation of th...

On this episode we learn the basic operation of the FR-810B rework station, how to set and use the various system parameters and how to use it in manual mode and in semi-automatic mode by linking individual presets.
This production was broadcast and recorded LIVE on July 9, 2020.
Thank you for watching!

The HAKKO HJ4000 SMD Rework Fixture is a cost effe...

The HAKKO HJ4000 SMD Rework Fixture is a cost effective solution for manual SMD rework using split-vision alignment precision, and can be used with select HAKKO hot air rework stations and IR preheaters for a complete, low-cost SMD rework system.

Thanks for watching!

Join us for American Hakko's "Eye On Hakko" LIVE w...

Join us for American Hakko's "Eye On Hakko" LIVE web broadcast covering a general overview of HAKKO's soldering, desoldering, hot air rework, and fume extraction systems, and CHP brand hand tools, ESD supplies and electric torque screwdrivers.

This live production was broadcast via GoToWebinar and recorded on January 25, 2019

Thanks for watching!

The C5028 is a handpiece rework fixture for use wi...

The C5028 is a handpiece rework fixture for use with the HAKKO FR-810, FR-810B, and FR-811 hot air rework stations. This fixture is smaller than the large C5029 fixture and does not include the large metal platform plate or component tray.

The C5029 is a handpiece rework fixture with a lar...

The C5029 is a handpiece rework fixture with a large metal platform plate for use with the HAKKO FR-810, FR-810B and FR-811 hot air rework stations.

This bottom heater integrates solely with the HAKK...

This bottom heater integrates solely with the HAKKO FR-811 SMD hot air rework system.

A complete, economical SMD hot air rework system, ...

A complete, economical SMD hot air rework system, including the HAKKO FR-811 hot air station, bottom heater, board holder, handpiece rework fixture, and vision system.

An advanced SMD rework station with vacuum pickup ...

An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

The HAKKO FR-810B is ideal for removing SMDs and i...

The HAKKO FR-810B is ideal for removing SMDs and includes an integrated vacuum pickup system with a special visual indicator in the handpiece that allows the operator to visually see when the component has completely reflowed and is safely lifted from the pad.

The FR-810 SMD Hot Air Rework Station has a self-c...

The FR-810 SMD Hot Air Rework Station has a self-contained turbine air source and a powerful ceramic heater that delivers a hot air stream up to 1120В°F. This station is excellent for all SMD soldering and desoldering applications.

After reflowing the soldered connection and the co...

After reflowing the soldered connection and the component has been removed from the PCB, residual solder remains in the through-holes. The 486 removes the solder with an air hood tool. Use the 486 with the Hakko 485 soldering system.

How To setup the Hakko FM-2029 hot air pencil into...

How To setup the Hakko FM-2029 hot air pencil into an auto mode to follow a rework profile of heat, soak and reflow

The FA-430 features two filters, comprising a thre...

The FA-430 features two filters, comprising a three stages filtering process, 3-airflow modes, and a filter change notification function. Compact and portable.

A shop air desoldering and soldering station....

A shop air desoldering and soldering station.

A brief overview of the Hakko FR-801/802/803/803B ...

A brief overview of the Hakko FR-801/802/803/803B hot air rework stations