Videos

A 400W Powered Ultra Heavy-Duty soldering station ...

A 400W Powered Ultra Heavy-Duty soldering station with new software capabilities, new T37 tips, backwards compatible, and new holder and handpiece. The FX-805 Ultra Heavy-Duty Soldering Station is the perfect solution in the Large Current Era. The Hakko FX-805 packs 400W of power, meant for difficult soldering of large mass components such as high current inductor coils, large transformers, shields, and difficult to solder heat sinks. The station has new T37 390W Tips and is also backwards compatible with T33 260W tips that have top controlled temperatures and multiple shapes. All with a brand-new software easy to use operating system to make programming and testing easy as 1, 2, 3.

Find out for yourself what makes the DPF-300 Depan...

Find out for yourself what makes the DPF-300 Depaneling System the perfect solution to depaneling PCBs from multi-block panels. Portable, ESD safe with no programming required, the DPF-300 proves why Hakko is known for its quality, reliability, and power. Easy to use, interchangeable guides and milling bits, this router table always gets the job done. If you're in need of depaneling PCBs then the DPF-300 is your answer.

A quick guide on where to obtain the USB Driver so...

A quick guide on where to obtain the USB Driver software for the FR-811 and how to properly install it. The FR-811 is advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

Watch and learn about the CHP DPF-300 depaneling t...

Watch and learn about the CHP DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time. Thanks for watching!

The DPF-300 is a manual router table for depanelin...

The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.

On this episode we demonstrate the CHP brand DPF-3...

On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
This episode was broadcast and recorded LIVE on September 11, 2020.
Thanks for watching!

On this episode we learn the basic operation of th...

On this episode we learn the basic operation of the FR-810B rework station, how to set and use the various system parameters and how to use it in manual mode and in semi-automatic mode by linking individual presets.
This production was broadcast and recorded LIVE on July 9, 2020.
Thank you for watching!

Learn proper maintenance on the HAKKO FA-400 Smoke...

Learn proper maintenance on the HAKKO FA-400 Smoke Absorber and FA-430 Fume Extraction System in this episode of "Eye On Hakko."
This episode was broadcast LIVE and recorded on April 30, 2020.
Thanks for watching!

Watch and learn what customers have to say about t...

Watch and learn what customers have to say about the CHP DPF-200 manual router table.

Thanks for watching!

Join us for an overview of the HAKKO FA-400 Smoke ...

Join us for an overview of the HAKKO FA-400 Smoke Absorber and the FA-430 Fume Extraction System.

This production was broadcast LIVE via GoToWebinar and recorded on August 30, 2019.

Thanks for watching!

The FX-1002 micro soldering iron is used with the ...

The FX-1002 micro soldering iron is used with the HAKKO FX-100 RF Induction Heat Soldering System and is ideal for precision soldering of 0201 and other small SMD chip components, especially under microscopes and magnifiers.

Thanks for watching!

Learn step-by-step how easy it is to program the H...

Learn step-by-step how easy it is to program the HU-200 for point soldering with the pre-installed programming software.

Thanks for watching!

In this episode we talk about some of the features...

In this episode we talk about some of the features of the HAKKO FX-100 RF Induction Heat Soldering System.
This production was broadcast LIVE via GoToWebinar and recorded on April 26, 2019.
Thanks for watching!

A quick look into the built-in solder feeder for t...

A quick look into the built-in solder feeder for the Hakko HU-200 Robotic Soldering System.

A brief guide into Hakko's HU-200 positioning syst...

A brief guide into Hakko's HU-200 positioning system.

A quick overview of the programming required for t...

A quick overview of the programming required for the Hakko HU-200 Robotic Soldering System.

In this video we examine the unique features of th...

In this video we examine the unique features of the HAKKO HU-200 robotic soldering system.

Join us for American Hakko's "Eye On Hakko" LIVE w...

Join us for American Hakko's "Eye On Hakko" LIVE web broadcast covering a general overview of HAKKO's soldering, desoldering, hot air rework, and fume extraction systems, and CHP brand hand tools, ESD supplies and electric torque screwdrivers.

This live production was broadcast via GoToWebinar and recorded on January 25, 2019

Thanks for watching!

A short 76 sec video showcasing some of the featur...

A short 76 sec video showcasing some of the features of the HU-200 robotic soldering system.

Learn how the HAKKO FU-500 solder feeder works whe...

Learn how the HAKKO FU-500 solder feeder works when combined with the HAKKO FX-601 soldering module and integrated with a robot for an automated robotic soldering system.

This video demonstrates how to use some of the fea...

This video demonstrates how to use some of the features of the FX-100 soldering system (Sleep Mode, Auto Shut-OFF, etc.) including a short tutorial on proper tip maintenance and the introduction of the HAKKO FX-1002 micro soldering iron.

The CHP DFP 200 is a manual router table for depan...

The CHP DFP 200 is a manual router table for depaneling printed circuit boards from a panel or multi-block. The DPF 200 milling cutters (bits) cut the tab of the panel with the same quality as a expensive automated system but at a much lower cost. Features include, interchangeable guide rails designed for safety, an integrated vacuum system located directly on the guide rail to remove circuit board dust from the work area, ESD steel table construction with an Equipotential Bonding Point to protect against electro-static discharge, a wide selection of milling cutters (bits) with specific geometric shapes, locking casters for portablitly, and much more.

This bottom heater integrates solely with the HAKK...

This bottom heater integrates solely with the HAKKO FR-811 SMD hot air rework system.

A complete, economical SMD hot air rework system, ...

A complete, economical SMD hot air rework system, including the HAKKO FR-811 hot air station, bottom heater, board holder, handpiece rework fixture, and vision system.

An advanced SMD rework station with vacuum pickup ...

An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

The HAKKO FR-810B is ideal for removing SMDs and i...

The HAKKO FR-810B is ideal for removing SMDs and includes an integrated vacuum pickup system with a special visual indicator in the handpiece that allows the operator to visually see when the component has completely reflowed and is safely lifted from the pad.

The FX-100 has a variety of features that can be a...

The FX-100 has a variety of features that can be accessed and set up with the display menu. Learn HOW TO engage "boost" mode, set up password lock out, auto power off and sleep function.

Experience the power of the next generation of RF ...

Experience the power of the next generation of RF (induction heat) soldering with the Hakko FX-100 soldering system.

The FM-2032 micro soldering iron extends precision...

The FM-2032 micro soldering iron extends precision micro soldering capabilities to a variety of HAKKO soldering and rework systems.

After reflowing the soldered connection and the co...

After reflowing the soldered connection and the component has been removed from the PCB, residual solder remains in the through-holes. The 486 removes the solder with an air hood tool. Use the 486 with the Hakko 485 soldering system.

How To turn off the grip alarm if not using all th...

How To turn off the grip alarm if not using all three handpieces at the same time

How To setup the Hakko FM-2029 hot air pencil into...

How To setup the Hakko FM-2029 hot air pencil into an auto mode to follow a rework profile of heat, soak and reflow

How To change the preset and working temperature...

How To change the preset and working temperature

How To change the parameters on the different chan...

How To change the parameters on the different channels

How To change the preset labels...

How To change the preset labels

The FA-430 features two filters, comprising a thre...

The FA-430 features two filters, comprising a three stages filtering process, 3-airflow modes, and a filter change notification function. Compact and portable.

A quick overview of the basic setup of the FM-206 ...

A quick overview of the basic setup of the FM-206 3-port rework system

Watch the Hakko FM-206 Trailer...

Watch the Hakko FM-206 Trailer

Excellent for soldering and desoldering multi-lead...

Excellent for soldering and desoldering multi-leaded through-hole components and connectors mounted on printed circuit boards

How To remove adhesive-bonded components with the ...

How To remove adhesive-bonded components with the Hakko FR-1418 BGA rework system

An ideal tip maintenance system to help renew / re...

An ideal tip maintenance system to help renew / restore oxidized soldering iron tips and increase their longevity.