Videos

A 400W Powered Ultra Heavy-Duty soldering station ...

A 400W Powered Ultra Heavy-Duty soldering station with new software capabilities, new T37 tips, backwards compatible, and new holder and handpiece. The FX-805 Ultra Heavy-Duty Soldering Station is the perfect solution in the Large Current Era. The Hakko FX-805 packs 400W of power, meant for difficult soldering of large mass components such as high current inductor coils, large transformers, shields, and difficult to solder heat sinks. The station has new T37 390W Tips and is also backwards compatible with T33 260W tips that have top controlled temperatures and multiple shapes. All with a brand-new software easy to use operating system to make programming and testing easy as 1, 2, 3.

Experience the power of induction heating with the...

Experience the power of induction heating with the HAKKO FX-100 Soldering Station. Designed for fast, efficient, and reliable soldering, the FX-100 sets a new standard for quality. It’s compact design, boost control, and precision is RF induction heating technology at its best. Versatile with tips sizes and shapes at different temperatures, and armed with a Micro Soldering Iron and Micro Soldering Tweezers! Is there anything this station can't do?

A quick guide on where to obtain the USB Driver so...

A quick guide on where to obtain the USB Driver software for the FR-811 and how to properly install it. The FR-811 is advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

A new cap kit designed for the FX-600 and FX-601 s...

A new cap kit designed for the FX-600 and FX-601 soldering irons. This protective cap is easy to install and take apart. Once installed, you simply unscrew the cap to expose the soldering iron tip for use. When you are finished soldering, unplug the soldering iron and screw the cap back on. The heat resistant plastic prevents the tip from contacting and melting other tools or power cords in your toolbox when you put it away. It also helps reduce the risk of injury from accidentally touching the soldering iron tip when it is cooling down after use.

When soldering or desoldering components on a circ...

When soldering or desoldering components on a circuit board, preheat is often needed to assist the work. In this episode we examine the HAKKO FR-830 and FR-870B preheaters and demonstrate how to replace the heater lamps on the FR-872 preheater.
This episode was broadcast and recorded live on August 13, 2020.
Thanks for watching!

The FX-1002 micro soldering iron is used with the ...

The FX-1002 micro soldering iron is used with the HAKKO FX-100 RF Induction Heat Soldering System and is ideal for precision soldering of 0201 and other small SMD chip components, especially under microscopes and magnifiers.

Thanks for watching!

In this episode we talk about some of the features...

In this episode we talk about some of the features of the HAKKO FX-100 RF Induction Heat Soldering System.
This production was broadcast LIVE via GoToWebinar and recorded on April 26, 2019.
Thanks for watching!

This short 45 second video showcases some of the n...

This short 45 second video showcases some of the new enhanced features of the FT-802, which include an integrated handpiece holder on top of the station to maximize bench space, a hands-free blade removal plate, set screws to ensure blade alignment, an ergonomic heat resistant handpiece, and HAKKO G4 blades with superior thermal performance.

Thanks for watching!

This video demonstrates how to use some of the fea...

This video demonstrates how to use some of the features of the FX-100 soldering system (Sleep Mode, Auto Shut-OFF, etc.) including a short tutorial on proper tip maintenance and the introduction of the HAKKO FX-1002 micro soldering iron.

This bottom heater integrates solely with the HAKK...

This bottom heater integrates solely with the HAKKO FR-811 SMD hot air rework system.

A complete, economical SMD hot air rework system, ...

A complete, economical SMD hot air rework system, including the HAKKO FR-811 hot air station, bottom heater, board holder, handpiece rework fixture, and vision system.

An advanced SMD rework station with vacuum pickup ...

An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

The FR-810 SMD Hot Air Rework Station has a self-c...

The FR-810 SMD Hot Air Rework Station has a self-contained turbine air source and a powerful ceramic heater that delivers a hot air stream up to 1120В°F. This station is excellent for all SMD soldering and desoldering applications.

The FX-100 has a variety of features that can be a...

The FX-100 has a variety of features that can be accessed and set up with the display menu. Learn HOW TO engage "boost" mode, set up password lock out, auto power off and sleep function.

Experience the power of the next generation of RF ...

Experience the power of the next generation of RF (induction heat) soldering with the Hakko FX-100 soldering system.

How To setup the Hakko FM-2029 hot air pencil into...

How To setup the Hakko FM-2029 hot air pencil into an auto mode to follow a rework profile of heat, soak and reflow