Videos

A quick guide on where to obtain the USB Driver so...

A quick guide on where to obtain the USB Driver software for the FR-811 and how to properly install it. The FR-811 is advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

Watch and learn about the CHP DPF-300 depaneling t...

Watch and learn about the CHP DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time. Thanks for watching!

The DPF-300 is a manual router table for depanelin...

The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.

Sei and Kai talk about the features of the portabl...

Sei and Kai talk about the features of the portable FX-901 soldering iron and demonstrate soldering an LED to a circuit board.
Thanks for watching!

On this episode we demonstrate the CHP brand DPF-3...

On this episode we demonstrate the CHP brand DPF-300 depaneling table. The DPF-300 is a manual router table for depaneling circuit boards (PCBs) from a panel or multi-block with the quality performance of an expensive automated system but at a much lower cost. The DPF-300 is equipped with an industrial-type electric motor spindle, eliminating the need for compressed air, and the steel guide rails are designed for safety and deliver a precision cut every time.
This episode was broadcast and recorded LIVE on September 11, 2020.
Thanks for watching!

When soldering or desoldering components on a circ...

When soldering or desoldering components on a circuit board, preheat is often needed to assist the work. In this episode we examine the HAKKO FR-830 and FR-870B preheaters and demonstrate how to replace the heater lamps on the FR-872 preheater.
This episode was broadcast and recorded live on August 13, 2020.
Thanks for watching!

The CHP DFP 200 is a manual router table for depan...

The CHP DFP 200 is a manual router table for depaneling printed circuit boards from a panel or multi-block. The DPF 200 milling cutters (bits) cut the tab of the panel with the same quality as a expensive automated system but at a much lower cost. Features include, interchangeable guide rails designed for safety, an integrated vacuum system located directly on the guide rail to remove circuit board dust from the work area, ESD steel table construction with an Equipotential Bonding Point to protect against electro-static discharge, a wide selection of milling cutters (bits) with specific geometric shapes, locking casters for portablitly, and much more.

The C5027 board holder can be used independently o...

The C5027 board holder can be used independently or attached to the HAKKO C5028 or C5029 handpiece fixture for precise component rework. Features one-touch slide adjustment for fast and easy setup and fine X-axis adjustment.

A complete, economical SMD hot air rework system, ...

A complete, economical SMD hot air rework system, including the HAKKO FR-811 hot air station, bottom heater, board holder, handpiece rework fixture, and vision system.

An advanced SMD rework station with vacuum pickup ...

An advanced SMD rework station with vacuum pickup and a multitude of features for every need. When integrated with a bottom heater, board fixture and vision system, the FR-811 is a complete SMD rework system and the ideal choice for bottom terminated components.

The FR-872 is a low profile, bench-top preheater d...

The FR-872 is a low profile, bench-top preheater designed to precondition circuit boards for soldering and desoldering more easily and with improved results.

Excellent for soldering and desoldering multi-lead...

Excellent for soldering and desoldering multi-leaded through-hole components and connectors mounted on printed circuit boards

How To removed (desolder) large gold connector pin...

How To removed (desolder) large gold connector pins from a circuit board with the Hakko FM-2022 parallel remover (hot tweezers)