Videos

Join Kenta as he introduces the all new Dual-Port ...

Join Kenta as he introduces the all new Dual-Port Soldering Station, FX-972. A 200W station with a wide temperature range that supports up to (8) different handpieces. The FX-972 station uses a minimal footprint design that allows multiple units to be stacked to conserve bench space and includes a new easy-to-read display that is more than 3 times larger than the FM-203 and displays set temperature and sensor temperature simultaneously.

The Hakko FX-972 Dual-Port Soldering Station is a ...

The Hakko FX-972 Dual-Port Soldering Station is a next-generation high-performance 200W soldering station that supports a wide range of new handpieces. With a minimal footprint design, the FX-972 allows multiple units to be stacked to conserve bench space and includes a new easy-to-read display that is more than 3 times larger than previous Hakko stations. Re-designed to be intuitive with new features such as an IR auto offset when using the FG-100B Tip Thermometer or FG-101B Station Tester, a preset mode that allows easy selection of up to 5 user programmable presets, 3-letter passcode lock for process control, and user selectable sleep temperature. The HAKKO FX-972 also includes a USB interface that allows the station to be set up, controlled, and monitored from a PC using the HAKKO Control Software that is included with the station.

The latest from CHP are the ATX-12, 30, and 50 Int...

The latest from CHP are the ATX-12, 30, and 50 Intelligent Torque Drivers. These premium non-slip grip drivers work with the ATX Intelligent Torque Controller to calculate pressure and precision. These transducer drivers have an LED status indicator ring, use a 1/4” hex bit, a torque range of 2.4 to 50 (kgf-cm) with a max speed of 2000. The controller includes a network interface that stores and exports graph data, is user friendly and intuitive for easy set-up. LED backlight, the controller comes with either 1 or 2 ports for powering and controlling the ATX drivers. The large touchscreen interface allows the user to easily adjust the settings on the drivers for superior torque control.

In this video we showcase the CHP brand of electri...

In this video we showcase the CHP brand of electric torque screwdrivers, power supplies and numerous accessories.

The electric screwdrivers are designed for precision torque control and include a wide selection of brush, brushless and direct plug-in models with torque ranges from 0.26 - 21.7 lbf-in and speeds from 450 - 2000 RPM. All drivers are ESD safe to protect assemblies from electro-static shock. Watch to learn more.

Thanks for watching!

The CHP DFP 200 is a manual router table for depan...

The CHP DFP 200 is a manual router table for depaneling printed circuit boards from a panel or multi-block. The DPF 200 milling cutters (bits) cut the tab of the panel with the same quality as a expensive automated system but at a much lower cost. Features include, interchangeable guide rails designed for safety, an integrated vacuum system located directly on the guide rail to remove circuit board dust from the work area, ESD steel table construction with an Equipotential Bonding Point to protect against electro-static discharge, a wide selection of milling cutters (bits) with specific geometric shapes, locking casters for portablitly, and much more.