Availability: Backordered
Part Number
UR Soldering Kit

Universal Robots Soldering Kit

List Price:

Everything you need to convert your UR robot into a soldering robot!

Click here to request a Quote

Pricing starts at $6,000. 

The Hakko Soldering Kit for Universal Robots is a soldering iron and solder wire feeder that enables the robot to perform manual soldering tasks. This product is ideal for automating virtually any hand soldering process by increasing overall throughput and consistency of the solder joints.

The FU-500 Intelligent Solder Feeder lends a helping hand to automatically feed the solder wire to a specific position and allows for easy adjustment of the solder feed position, which is critical for automated systems. The Intelligent Solder Feed Unit also features a compact driver unit that allows the feed to be brought closer to the iron, increasing the accuracy of the amount of solder fed.

With an optical sensor, the FU-500 can detect solder clogging, slipping, and the end of the solder roll. The Intelligent Solder Feeder is also equipped with a mechanism that perforates into the solder wire as a countermeasure against flux and solder splash.

The FU-601 Robotic Integration Soldering Module features Hakko’s reliable, high-performance composite tips with accurate temperature for consistent solder joints. The tips can also be easily and quickly replaced then realigned using the tip alignment tool.


FU-500 Station

 Model Name  FU-500
 Part No.  FU500-21X (L Type)
 Input Voltage  127 VAC 50/60 Hz
 Weight w/o Cord  5.1 lb. (2.3 kg)
 Outer Dimension

 5.7 x 3.9 x 9.1 in.
(145 x 100 x 230 mm)

 Power Consumption  35W
 Feeder Weight  1.8lb. (800g)
 Compatible Solder Diameters  0.3 - 1.6 mm
 ESD Safe  Yes


FU-601 Station

 Model  FU-601
 Part No.  FU601-40X
 Input Voltage  120 VAC 50/60 Hz
 Power Consumption.  300W
 Temperature Range  120°F – 940°F (50°C – 500°C)
 Output Voltage  29V
 Outer Dimension (W x H x D)  5.7 x 4.2 x 8.3in.
(145 x 107 x 211mm)
 Weight (w/o Cord)  8.8 lb. (4kg)
 ESD Safe  Yes


FU-6002 Handpiece

 Model Name  FU-6002
 Part No.  FU6002-01X (L-Shaped Iron)
 Power Consumption  260W (29V)
 Tip-to-Ground Resistance  < 2ohms
 Tip-to-Ground Potential  < 2mV
 Heater  Composite Ceramic Cartridge
 Tips1  TX1 and TX2 Series
 Cord Length  16.4 ft. (5 m)
 Total Length (w/o Cord)2  6.6 in. (168 mm)
 Weight (w/o Cord)2  0.38 lb. (173g)

1Tips not included

2As measured with TX2-4XD tip installed

 What's in the box?

 Description  Part No.
 FU-500 Station  
 FU-500 Solder Feed Unit  FU500-21X
 Feeder Unit (L Type)  CX1010
 Tube Unit (0.3-1.0 mm)  BX1041
 Tube Unit (1.2-1.6 mm)  BX1042
 Feeder Cable  BX1036
 Power Cord  B3508
 Solder Reel Stand  BX1057
 Instruction Manual  --
 FU-601 Station  
 FU-601 Station
 Soldering Handpiece (Straight)
 Iron Mount
 Tip Alignment Tool (TX1)
 Tip Alignment Toool (TX2)
 Iron Cable
 Connecting Cable
 Flux Cover  BX1027
 Feeder Unit Attachment Screw  --
 Heat Resistant Pad  B2300
 Power Cord  B2419
 Instruction Manual  --
 End Effector Mount for UR  555-300
 PNP to NPN Adapter  555-309

Configuration Options

To configure the FU-500 for use with your soldering application, select the Feeder Drive, Guide Pipe Assembly, and PTFE Tube Insert based on the diameter of the solder you will be using. These parts are sold seperately, but are required for the station to be operational.

 Solder Diameter
   0.3 mm  0.5 mm  0.6 mm  0.8 mm  1.0 mm  1.2 mm  1.6 mm
 Feeder Drive  BX1000  BX1001  BX1002  BX1003  BX1004  BX1005  BX1006
 Guide Pipe Assembly  BX1007 BX1008 BX1009
 PTFE Tube Insert  BX1010 BX1011  BX1012  BX1013  BX1014  BX1015

To Top