486 Air Control Unit for 485

List Price:

$1,492.47

Air blower for 485

Note: Nozzles not included

No Cancellation/ Non-Returnable

Usually ships in

5 weeks

Features & Benefits

AIR UNIT for the 485 Soldering System

After reflowing the soldered connection(s) with the 485 soldering system and the component has been removed from the board, residual solder remains in the barrel of the through-hole board. The 486 removes the residual solder from the board with an air hood, which is attached to the 486 via an air hose.

To use the 486, after the component has been removed from the board, place the appropriate air hood/nozzle over the component area and activate the 486 air unit with the 485 unit's footswitch. The (adjustable) air pressure will remove the solder from the through-hole barrels under the air hood.

Part Number: 486

Specifications

Part Number	486
Air Pressure	2 kg/cm² (4.4 lbs.) - 7 kg/cm² (22 lbs.)
Dimensions (W x H x D)	486 (Air Unit)	150 x 100 x 300 mm (5.9 x 3.9 x 11.8 in.)
Weight (w/o Solder)	486 (Air Unit)	3.5 kg. (7.7 lbs.)

NOTE: 486 Air Unit/Blower is ONLY intended for use with the Hakko 485.

CONTENTS
Part Number	Description
485-28	14/16 pin air hood
485-29	18/20 pin air hood
485-21	28 pin air hood
485-31	42 pin air hood
Air Hood holder with hose (attached to 486)