C5016, Bottom Heater
The HAKKO C5016 bottom heater integrates and is fully controlled by the HAKKO FR-811 SMD hot air rework system with the execution of the user programmable rework profiles that are stored on the HAKKO FR-811.
The heater can be operated in power or thermocouple mode, including the ability to monitor/control the ramp rate of the assembly.
NOTE: The HAKKO C5016 must be used with the FR-811. It will not work on its own or with any other units.
|Input Voltage||120 VAC 50/60 Hz|
|Effective Heater Area||7.5 x 3.2 in. (190 x 80 mm)|
|Board Capacity||9.8 x 5.5 in. (248 x 140 mm)|
|Operating Modes||Power / Thermocouple|
|T/C Range||122-482°F (50-250°C)|
|T/C Stability||±9°F / ±5°C|
|Power Range||1 - 100% (1% increments)|
|Heater Control||Requires FR-811|
|Heater Type||High Efficiency Carbon Filament|
|Heater Lamp MTBF||~ 2100 hours|
|External Connections†||4-pin DIN for FR-811 ONLY|
|Dimensions (W x H x D)||
11.6 x 2.6 x 9.7 in.
295 x 66 x 246 mm
4.6 lb. (2.1 kg)
† Unit is completely controlled by the HAKKO FR-811 SMD Rework System. Requires connecting cable (included)
C5016 Bottom Heater
BE THE FIRST TO KNOW
About our latest products and exclusive offers.