We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
FR-1012 IR Preheater (Discontinued)
INFRARED BOARD PREHEATER
The FR-1012 is a bench-top board heater designed to elevate the temperature of printed circuit board assemblies so that components on them can be soldered and de-soldered more easily, and with improved results. This is particularly useful on medium to high-mass board assemblies, which can “heat-sink” a significant amount of energy being supplied by a soldering iron tip, or handheld hot-air tool. This tool is particularly useful when soldering Pb-free assemblies.
The Preheater operates in either of two modes, Power Mode or T/C (Thermocouple) Mode. Power Mode allows the user to set the output of the unit manually. When running in this mode, the unit will output the set percentage of power, regardless of the T/C actual value. A thermocouple is not required in this mode, but may be used to monitor the actual board temperature.
T/C Mode allows the user to set the desired temperature (50-180ºC/122-356ºF) of the PCB for closed-loop control of the temperature using the T/C input. A Type-K thermocouple must be secured to the PCB and plugged into the unit’s T/C jack for this mode to operate. When running in this mode, the unit will apply 100% power until the board reaches 10ºC below the set temperature. The unit will then start PID control to regulate the power output of the heater to hold the PCB at the set temperature.
Part Number: FR1012-01 (see Specifications for details)
Part No. | FR1012-01 |
|
Board Capacity | 12 x 15 inches | 305 x 380 mm |
Heated Area | 10 x 12 inches | 250 x 305 mm |
Heater Watts | 1200 W |
|
Heater Type | Low Mass Quartz I/R |
|
Thermocouple Inputs | (1) Type K |
|
Controller | Industrial Microprocessor |
|
Operating Modes | Power Mode - or - T/C Mode |
|
Power Requirements | 100 - 120V / 10A Standard |
|
Size | 14"W x 18"D x 5"H |
360 x 460 x 130 mm |
Weight | 16 lbs |
7 kg |
CONTENTS
Part No. | Description |
N/A | FR-1012 Preheater |
222-510 | IR Heater Lamp 500W |
222-512 | Type K, 36 Ga. Thermocouple |
-
Adjustable Boom Stand for FR-801, 802, and 803B$857.27The adjustable boom stand supports the Hakko FR-800 series(FR-801, FR-802, FR-803B) handpieces. ...
Learn More
-
222-510 Replacement IR Heater Lamp$13.97Replacement IR bottom heater lamp for the FR-1418. ...
Learn More -
-
-
999-226$350.07RAIL,THIRD,ASSY,w/2 CLIPS,FR-1012B This part has been replaced by 999-269 ...
Learn More -
-
-
-
-
-
-
999-246 Lamp Heater$16.57Bottom IR lamp Heater, 300W,Anti-Glare, for use with the FR-870/1418/1012B Preheater ...
Learn More -
999-247 Preheater$46.57Anti-Glare, Single Zone Preheater, for use with the FR-870/1418/1012B Preheater ...
Learn More -
-
-